View Enlarged
Ideal for new construction and retrofitting existing homes, common applications for the product include controlling:
- Electric water heaters
- High-voltage appliances (ovens, stovetops)
- Switched high-wattage indoor light fixtures (chandeliers)
- Spa and pool pumps
- Switched sport court lighting
- US commercial voltage lighting
- Heavy motorized perimeter gates
to mention just a few.
The product is designed to be permanently mounted in a fixed location. With the Heavy-Duty Power Controller, homeowners can turn heavy-duty systems on or off using:
- Control4 LED keypads
- Control4 programming utilizing variables, various states, or the time of day
- Control4’s 4Sight™ service from remote locations
Four low-voltage “dry contact” support manual override controls with hard-wired dry contact switches, allowing manually control independent of the Control4 system.
The product consists of two, high-voltage, 100-240VAC 30 Amp independently configurable relays that can control the following types of loads in residential or commercial applications:
- Motors
- Resistive loads
- Ballast type loads
The Heavy-Duty Power Controller also allows installers to setup up a stand-alone configuration that doesn’t require integration with a Control4 system.
The Heavy-Duty Power Controller is powered by one of two methods:
- Connecting a 100-240VAC line power to the High Voltage terminals of the devices; or,
- Connecting a 12VDC power supply to the + - power inputs of the Low Voltage terminal connector.
The product must be installed into high-voltage systems by locally qualified and licensed electricians. Any qualified and trained Control4 dealer can then add the product to the project and configure the operation of the relays.
Housed in a metal enclosure and an external antenna to enable ZigBee™ control, the Heavy-Duty Power Controller is designed for permanent mounting in a fixed location. It requires a safe, moisture-free location and in accordance with all local and national electrical codes. The product’s fixed wiring must also include the appropriate accessible disconnect devices (circuit breaker). Power cables can be connected to the product using conduit or by connecting flexible power lines to the product with feed-through cable clamps.
Heavy-Duty Power Controller Specifications |
Dimensions |
4.6" x 10.5" x 2.2" (117mm x 267mm x 56mm) |
||||||||||||||||||
Weight |
2.78 Lbs (1.26Kg) |
||||||||||||||||||
Maximum Ambient Operational Temperature |
140°F (60°C) |
||||||||||||||||||
Power Input |
100-240VAC at 50/60Hz, 0.1 A |
||||||||||||||||||
Relay Contact Load Ratings |
|
||||||||||||||||||
High-Voltage Wiring |
8-14 AWG gauge wiring depending on Load* |
||||||||||||||||||
Low-Voltage Wiring |
20-28 AWG gauge wire-Dry Contact Only |
||||||||||||||||||
Operational Environment |
Type 1. Device shall be mounted in a dry, moisture-protected location in accordance with National Electrical Code. |
||||||||||||||||||
Linked Mode |
Default Motor Delay Time: 15 seconds |
Safety Approvals
The Card Access Heavy-Duty Power Controller is a safety listed product with Intertek Corporation. Intertek is a Nationally Recognized Test Lab (NRTL) that owns and maintains the ETL mark which is legally equivalent to the UL and CSA Listing Marks for standards compliance. A representative sample of the Card Access Heavy-Duty Power Controller (HPC10A) has been evaluated by Intertek Labs and found to comply with the applicable requirements of the Standard for Industrial Control Equipment, ANSI/UL 508-2005, 17th Edition with Revisions 2005 and per the Standard for Industrial Control Equipment, CSA C22.2 No. 14-05.
Card Access has testing and application safety approvals to ship into the following countries:
- United States
- Canada
- European Union including:
|
|
|
All parts in the Card Access Heavy-Duty Power Controller meet the material restrictions of RoHS (Restriction of Hazardous Substances) as proposed by the RoHS Technical Adaptation Committee.
Product Contents
The Heavy-Duty Power Controller includes:
- One (1) Heavy-Duty Power Controller Device
- One (1) 2.4 GHz external 2 dBi omni-directional antenna
- Four (4) wall mounting screws
- Four (4) plastic dry wall anchors
- One (1) Quick Start and Installation Guide
- One (1) Installation Manual and Reference