View Enlarged
With Card Access 10-Packs you get the convenience of ordering in bulk and getting a better unit purchase price. Improve Control4 home automation for your customers by ‘spec’ing them into every job and using them to solve installation challenges as you encounter them.
Used with your preferred external switches and sensors, the Card Access Wireless Contact Relay works with your Control4® system. It combines the features of two contact relays, one contact sensor, a thermometer and ZigBee® (802.15.4) repeater into a single low-voltage device. Open and close automatic doors, blinds and gates, raise or lower projector screens, turn fireplaces on or off (or use it in any other contact relay applications you offer) in locations inside or outside the home.
The Wireless Contact Relay extends the range of the ZigBee mesh with built-in ZigBee repeater capabilities.
The Wireless Contact Relay includes an on-board magnetic contact sensor that wirelessly integrates into the Control4 system. You can use any standard magnetic contact or order one directly from Card Access.
A built-in thermometer adds remote temperature-sensing capabilities to the Control4 home, giving homeowners added automation features and capabilities based on indoor or outdoor temperature events.
The Wireless Contact Relay is compatible with Control4 version 1.7.2 and 1.7.3 (EmberNet) and Control4 version 1.8 or greater (ZigBee PRO).
Each Card Access Wireless Contact Relay includes the following:
- One (1) Wireless Contact Relay
- One (1) North American 12V DC Power Supply
- Four (4) wall mounting screws
- Four (4) plastic dry wall anchors
- Installation Guide / Product Warranty / Product Registration document
- Wiring Insert / LED Test Mode Instruction Card
The Wireless Contact Relay is FCC-approved, CE-approved and RoHS-compliant.
Used with your preferred external wired dry-contact sensors, the Card Access Wireless Contact Sensor works with your Control4® system combining the features of up to three contact switches and up to two thermometers into a single battery-powered device. Monitor garage doors, gates, windows, and pool or spa covers (or any other contact switch monitoring applications you offer) in locations inside or outside the home, and trigger Control4 home automation functions based on the open and closed states of the sensors--all without wires!
The Wireless Contact Sensor includes an integrated reed switch (for use with your favorite contact magnet) and one temperature sensor. LED indicators confirm alignment of your contact magnet, proper mesh network operation and connectivity, and proper operation of externally connected contact switches.
The Wireless Contact Sensor is compatible with Control4 version 1.7.2 and 1.7.3 (EmberNet) and Control4 version 1.8 or greater (ZigBee PRO).
Each Card Access Wireless Contact Switch includes the following:
- One (1) Wireless Contact Sensor
- Two (2) "AA" 1.5V alkaline batteries
- Four (4) wall mounting screws
- Four (4) plastic dry wall anchors
- Installation Guide / Product Warranty / Product Registration document
- Wiring Insert / LED Test Mode Instruction Card
The Wireless Contact Sensor is FCC-approved, CE-approved and RoHS-compliant.